Rig Expert AA-600 Antenna Analyzer

Rig Expert

Regular price $600.00

 

RigExpert AA-600 is a powerful antenna analyzers designed

for testing, checking, tuning or repairing antennas and
antenna feedlines.

Graphical SWR (Standing Wave Ratio) and impedance, as
well as Smith/polar chart displays are key features of these
analyzers which significantly reduce the time required to
adjust an antenna.

Easy-to use measurement modes, as well as additional
features such as connection to a personal computer make
the RigExpert AA-600 attractive for professionals and
hobbyists.

The following tasks are easily accomplished by using these
analyzers:

Rapid check-out of an antenna
Tuning an antenna to resonance
Antenna SWR and impedance measurement and comparison
before and after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parameters
Cable testing and fault location
Measuring capacitance or inductance of reactive loads
Warranty coverage by the RigExpertCare™


Frequency range: 0.1 to 600 MHz

Frequency entry: 1 kHz resolution

Measurement for 25, 50, 75 and 100-Ohm systems

SWR measurement range: 1 to 100 in numerical mode,
1 to 10 in graph mode

SWR display: numerical or easily-readable bar

R and X range: 0…10000, -10000…10000 in numerical mode,
0…1000, -1000…1000 in graph mode

Display modes:
–    SWR at single or multiple frequencies
–    SWR, return loss, R, X, Z, L, C at single frequency
–    SWR graph, 80 points
–    R, X graph, 80 points
–    Smith (or polar) chart, 80 points
–    TDR (Time Domain Reflectometer) graph

Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes.

RF output:
–    Connector type: N
–    Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of
the main signal are used.
–    Output power: -10 dBm (at 50 Ohm load)

Power:
–    Three 1.5V, alcaline batteries, type AA *
–    Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA
–    Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully
charged batteries are used
–    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes
power from these sources

Interface:
–    320×240 color TFT displaty
–    6×3 keys on the water-proof keypad
–    Multilingual menus and help screens
–    USB connection to a personal computer

Dimensions: 23x10x5.5 cm (9x4x2”)

Operating temperature: 0…40 °C (32…104 °F)

Weight: 650g (23 Oz)

Warranty: 2 years

GTIN-13: 4820185420037

RigExpert AA-600 is made in Ukraine.

Specifications are subject to change without notice.

* Batteries are not included with the analyzer.