PART NUMBER: TB25
THRUST BEARING
Premium weatherized thrust bearing that supports rotators and protects them from excessive
wear. Four set screws lock the mast in place. Twin ball bearing race. Die cast aluminum
housing and painted finish. Use with Glen Martin Hazers, Roof-Top Towers, and Martin
Towers. Maximum mast diameter 2-5/8", 900 lbs maximum vertical load. Weighs 3 pounds.

$105.00
HAZER ACCESSORIES
PART NUMBER: HR-6010
TAILTWISTER PLATE
Rotor & Top Plate for H-2 & H-3 Hazers when TailTwister rotor will be used.

$69.00
Glen Martin accessories are stocked at our facility and usually ship within one business day unless otherwise noted
PART NUMBER: APO HS-1301
SIDE ARM
Specially designed to work with the Hazer system, this 1/4" x 1-1/2" wide x 36" long aluminum side
arm allows you to mount another antenna easily. The unit bolts directly to the top or bottom of the
Hazer's main frame. Use on Hazer 2, 3, 4, 5, 6. Comes with stainless steel hardware to attach to your
Hazer.

$90.00
PART NUMBER: ML-2525
MESSENGER LINE KIT
A messenger line (galvanized steel cable) is fastened to the Hazer on one end, and the tower leg at
the bottom. All rotor, coax, and ground wires are plastic wire-tied to the messenger line, preventing
strain and elongation of your cables. Each messenger line kit includes strong galvanized steel
cable, which protects against wear and vandalism. Use on H-2, H-3, and H-4 Systems.

$158.00
PART NUMBER: HR-3015
HEAVY DUTY PULLEY BLOCK
Heavy duty replacement pulley block assembly for Hazer 2,3,4.
Supports extra heavy loads.

$99.00
PART NUMBER: MC-10
MAST CLAMP
Secure non-rotating masts with the Glen Martin heavy-duty mast clamp. Designed for use with Hazers,
Roof-top towers, and Martin towers. Four set screws lock the mast in place. Die cast aluminum, painted
finish. Maximum mast diameter 2.18", 800 pounds maximum vertical load. Manufacturer recommends
using two mast clamps for Glen Martin Hazers and requires two mast clamps for Glen Martin roof-top
towers. Weighs 1 pound.

$73.00
PART NUMBER: HR-2040
ROLLER BEARING SET
Roller bearing set for Hazer Tram Systems.
Modifies the Hazer so that it glides up and down the tower using wear-resistant plastic wheels.
This improves the Hazer's performance and eliminates any wear on your tower.

$140.00
PART NUMBER: LR-8400
LIGHTNING ROD KIT
Complete lightning rod kit for Glen Martin Hazers, Roof-Top Towers, and Martin Towers. Includes
lightning rod point, clamp, terminal lug clamp, 8' copper ground rod, and brass ground rod clamps.
Copper ground cable not included. Weighs 12 lbs.

$225.00
PART NUMBER: HR-6210
WINCH CABLE
5/32" x 7 x19 x 100' Stainless Steel Cable for 50' Tower.
This cable is an upgrade from the standard 1/8" cable that comes with the Hazer 2, 3, 4.

$149.00
PART NUMBER: BW-8001
BRAKE WINCH
For Hazer 2, 3, and 4. The brake winch has an internal friction brake which automatically
applies a constant, positive holding action. This prevents the winch from going out of control
and provides perfect control and peace of mind.

$165.00
Click to zoom in
PART NUMBER: HR-6212
WINCH CABLE
5/32" x 7 x19 x 120' Stainless Steel Cable for 60' Tower.
This cable is an upgrade from the standard 1/8" cable that comes with the Hazer 2, 3, 4.

$169.00
PART NUMBER: HR-6214
WINCH CABLE
5/32" x 7 x19 x 140' Stainless Steel Cable for 70' Tower.
This cable is an upgrade from the standard 1/8" cable that comes with the Hazer 2, 3, 4.

$199.00
CURRENTLY OUT OF STOCK

IF YOU WOULD LIKE NOT BE NOTIFIED
WHEN THIS ITEM IS BACK IN STOCK PLEASE
SEND AN EMAIL TO
SALES@ANTENNAPARTSOUTLET.COM WITH
THE PART NUMBER IN THE SUBJECT LINE
CURRENTLY OUT OF STOCK

IF YOU WOULD LIKE NOT BE NOTIFIED
WHEN THIS ITEM IS BACK IN STOCK PLEASE
SEND AN EMAIL TO
SALES@ANTENNAPARTSOUTLET.COM WITH
THE PART NUMBER IN THE SUBJECT LINE