Coax-Seal #101
10" strip of 1/2" wide Coax-Seal on double-sided peel-away paper.
Packaged individually in an envelope with full instructions.


$1.00
COAX-SEAL
Why do I need Coax-Seal?

Water and corrosion are the enemies of radio signals carried by wireless networks and radio and TV antennas. Moisture leads to
inefficient physical connections and a noisy line. Corrosion results in the destruction of the line's ability to carry signals.

In higher frequencies, UHF, VHF and microwave ranges, water contamination causes losses that look like dead shorts.

For amateur radio buffs, water contamination causes a significant change in SWR. Once corrosion starts, there is no way to stop it.
Poor radiation patterns result and antenna efficiency drops.

The simple and inexpensive solution is to seal all of your connections with Coax-Seal for years of protection from moisture and
corrosion!


Specifications

DESCRIPTION: Easily applied, hand-moldable, tacky black plastic mastic, on peel-away paper backing, suitable for waterproofing a
WIDE variety of connections. Adheres to vinyl & PVC outer jackets. Product is non-conductive, non-contaminating, and non-toxic.
Product is UV-Stable.

APPLICATIONS: Provides a long-lasting, waterproof seal for coaxial cable fittings and many other connections. Use for TV & radio
antennas. satellite dishes, CATV, wireless networks, marine electronics, feed lines, radar & microwave installations, and many other
applications.

VISCOSITY: ASTN D5-52, gm load, 5 sec = 7.0/10.0 mm. Non-hardening, non-oxidizing at ambient temperature.

TEMPERATURE RANGE: Apply between 40°F and 110° F

PERCENT SOLIDS: 98%

SOLVENTS: None

OTHER PROPERTIES: Material is non-staining to paint; stays flexiable and maintains a waterproof seal over an extreme range of
temperatures. Will not crack at -200°F, will not slump 1 hour @ 35° F.

OPTIMUM CURE CYCLE: Not curable

APPLICATION EQUIPMENT: Hand Applied
Coax-Seal #104
60" Roll of 1/2" wide Coax-Seal.

$6.95